The unique lubricity and wear resistance of CSB-EP series materials is mainly due to the addition of reinforcing fibers, lubricants and other improvers to the thermoplastic materials of the host material. Due to the thermoplastic composite material, the CSB-EP series is a highly wear-resistant crystal mesh structure with a special lubricant evenly distributed in the mesh.
Due to the self-lubricating properties of the CSB-EP series of materials, no additional lubricant is required in use. The good self-lubricity of the CSB-EP series and the overall product are lubricated materials, so the product has a long service life; for coated, composite and impregnated metal products, once the friction layer or lubricating oil is exhausted, The end of life is over.
The most critical moment for any bearing is the start-up phase. At this time, the lubricating film has not been formed and the bearing starts to work, which is the most common case. As long as the bearing is working under load, the bearing will produce subtle wear. In the start-up phase, when the fine wear is sufficient, the outer surface of the shaft is filled with these fine wear particles, so that an optimal lubricating film can be produced with low wear. After startup, the subtle wear drops rapidly and these changes have little effect on the size. In the continuous work after the start of the start-up phase, the wear rate is small and stable.
For more information and purchase please visit: https://www.supplyforever.com
