Talking about Solving the Coupling of Woodworking Engraving Machine Engraving

1. Check if the coupling is loose.

If the coupling is not tight, the internal data of the machine will be lost, and the engraving cannot be performed synchronously. If it is found to be loose, tighten the coupling in time.

2. See if the voltage is stable.

Unstable voltage can also cause the machine to operate abnormally. When the engraving machine is working, it must be sure that the voltage is stable.

3. Check if the computer or USB flash drive is poisoned.

Computer virus or U disk poisoning will disrupt the system's application, so that the engraving machine can not be synchronized when working. Therefore, if you find that the poisoning situation should restart the system immediately, use the engraving machine after the antivirus.

4. Reasonably set the running speed of the engraving machine

The unreasonable setting of the engraving machine's running speed or spindle speed will also affect the normal operation of the machine. Therefore, it is necessary to properly debug the internal settings of the machine to ensure normal operation.