After the stone engraving machine is used, the power must be cut off. After the monitor has no display and the main circuit power indicator is off, it can be left. This can extend the service life of the stone engraving machine.
At present, many people in the society suffer from sudden work due to work pressure and long-term overload. Although the stone engraving machine is a machine, it is no exception. Regular maintenance is required to achieve your ideal working condition.
1. Ensure that the stone engraving machine has a continuous running time of less than 10 hours per day to ensure the cleaning of the cooling water and the normal operation of the pump. The water-cooled spindle motor must not be dehydrated, and the cooling water should be replaced regularly to prevent the water temperature from being too high.
2. Clean up after use. Stone engraving machine will produce a lot of dust during use, and excessive dust will have a great impact on the life of stone engraving machine. Therefore, be sure to clean the dust on the platform and transmission system after each use, and regularly lubricate the transmission system (X.Y.Z three-axis).
3. If the stone engraving machine is not used for a long time, it should be refilled regularly (weekly) to ensure the flexibility of the transmission system.
4. Regularly (depending on the use) clean the dust inside the electrical box, check the terminal screw is loose, to ensure safe and reliable use of the circuit.
5. When the stone engraving machine is used, the power must be cut off. After the monitor has no display and the main circuit power indicator is off, it can be left. This can extend the service life of the stone engraving machine.
