How to switch between different materials of engraving machine? Jinan Jinshi Engraving (Carving) Co., Ltd. reminds you that the technology required for the engraving machine engraving knife is quite high, so after selecting the operator, generally a training is required to formally The operation of the knives, especially the woodworking engraving machine, and what should be paid attention to when using the engraving tools?
1. Familiar with the choice of cutting edge length of woodworking engraving machine, the choice of cutting edge length should be 2-3MM to the most suitable cutting edge length. Cutting acrylic motor speed is 18000-24000 rpm, and the cutter blade length is too long to be used to process harder materials.
2. The engraving target is different, the selected woodworking engraving machine tool is also different. The fine text pattern engraving should use small angle and small knife tip tool. When engraving large text pattern, try to choose large angle without affecting the accuracy requirement. When the large tool tip and the engraving knife are designed, the tool angle and the tool tip should be maximized to improve the engraving efficiency. The material of the engraving material should be large and the angle should be large.
3. Woodworking engraving machine engraving knives frequently appear broken knife situation, the occurrence of this kind of thing is related to the quality of the tool. Also related to your engraving setup habits, engraving machine guide motor accuracy, sheet, and fixtures.
4. For the problem of selecting the knife for the woodworking engraving machine, the staff must understand that the small-power spindle motor (small fixture) should use a small-handle tool (3.175 mm, 4.0 mm). The cutting speed should not be too fast, in high-speed milling. Keep the minimum resistance and get the best cutting effect. High-power motors can use large-diameter tools to improve the engraving speed.
