How to avoid mistakes when operating the three-dimensional stone engraving machine

       When using the three-dimensional stone engraving machine to produce and process, how to avoid the mistake of engraving production is a problem that many customers are concerned about, because often because the engraving path is set incorrectly, or the operation is wrong, the engraving error is easy to occur, and the result of the error is waste of the board. This is a big waste, because the plates used by many customers are very expensive, and a little mistake is made, the entire plate is wasted. Therefore, how to avoid the engraving error of the three-dimensional stone engraving machine is a common problem that everyone faces. Here, I would like to tell everyone a flaw, using the control system to avoid the engraving error of the three-dimensional stone engraving machine.
       The three-dimensional stone engraving machine control system is mainly the Weihong control system. There is a more important function in the Weihong control system - simulation. Using simulation, we can check the program to be processed. If the program input is wrong, we can adjust it in time to avoid the processing error of the three-dimensional stone engraving machine. We can preview the processing effect in advance by using simulation. If the effect is not good, we can re-select the appropriate one. The tool calculation path; using simulation, we can calculate the time required for the actual machining in advance, so that we can arrange our time reasonably; use the simulation to check the lifting distance and the cutting order of the tool. The lifting knife is too high or too low. The order of engraving can be adjusted through this link.
       For users who are new to the three-dimensional stone engraving machine, the importance of simulation is particularly important. The operation itself may be somewhat unfamiliar. If the simulation preview is not performed, if there is a problem in one link, it may cause material waste or tool breakage. Simulation is equivalent to an actual machining process. Using simulation software, we can learn and demonstrate while it is easier to master.
      For the three-dimensional stone engraving machine to avoid damage caused by improper operation, and in order not to waste the board and save manpower, we must be cautious in the operation, that is, the staff who are skilled in operating the three-dimensional stone engraving machine, it is best to use before carving. The simulation function of the Weihong system detects whether the engraving path is correct or not.