1. Acrylic cutting processing, it is recommended to use single-blade spiral milling cutter, which is characterized by smokeless and odorless, fast, high efficiency, non-sticky, and truly environmentally friendly. Its special manufacturing process guarantees that processing acrylic does not explode. , very fine knife pattern (even without knife), the surface is smooth and flat. The surface needs to be frosted. It is recommended to use a double-edged three-blade spiral milling cutter.
2. MDF cutting process (for advertising mold opening), it is recommended to use double-blade large chip spiral milling cutter, which has two high-capacity chip flutes and double-edged design, which has good chip removal function and reaches Very good tool balance, no blackening, no capping, long service life, etc. when processing high density boards.
3. For aluminum sheet cutting, it is recommended to use a single-blade special aluminum milling cutter. It does not stick to the knife during processing, and it has high speed and high efficiency.
4. The upper and lower burr-free cutting process, it is recommended to use a single-edged, double-edged upper and lower cutting cutter.
5. For metal engraving machine processing, it is recommended to use a single-blade, double-blade straight groove flat-bottomed sharp knife.
6.3D engraving knives, high concentricity, sharp edge, can do precision 3D engraving.
7. High-density board, solid-wood milling cutter is recommended.
8. Multi-layer board, splint processing, it is recommended to use double-blade straight slot milling cutter.
9. Precision small relief processing, it is recommended to use a round bottom knife.
10. Cork, MDF, native wood, PVC, acrylic large deep relief processing, it is recommended to use single-blade spiral ball end mill.
11. The effect of the lower cutter is that there is no burr on the upper surface of the processed product, and it will not be rocked when processed.
12. Metal mold milling cutter, it is recommended to use tungsten steel milling cutter, the surface is plated with purple black and hard titanium.
13. The use of diamond engraving knives is recommended for acrylic mirror engraving.
14. Multi-strip milling cutters are recommended for roughing particleboards.
