Unexpected equipment can be stopped when the bearing is damaged. Even if it is an hourly shutdown, it can cause huge production losses due to premature bearing damage, especially capital-intensive production.
Why is FAG imported bearings damaged?
Bearings are precision parts, so they require a very cautious attitude when using them. That is, they use high-performance bearings. If they are used improperly, they can not achieve the expected performance and easily damage the bearings. Therefore, the following matters should be noted when using bearings:
First, keep the FAG bearings and their surroundings clean
Even if the smiling dust that is invisible to the naked eye enters the bearing, it will increase the wear, vibration and noise of the bearing.
Second, use the installation carefully
Strong stamping is not allowed. It is not allowed to directly hit the bearing with a hammer. It is not allowed to transmit pressure through the rolling elements.
Third, use appropriate and accurate installation tools
Try to use special tools and try to avoid using cloth and short fibers.
Fourth, to prevent bearing corrosion
When taking the bearing directly by hand, wash off the sweat on your hands and apply high-quality mineral oil before handling. Pay special attention to rust prevention during the rainy season and summer.
However, under certain special operating conditions, bearings can achieve longer life than traditional calculations, especially at light loads. These special operating conditions are when the rolling surfaces (tracks and rolling elements) are effectively separated by a lubricant film and the surface damage caused by contaminants is limited. In fact, under ideal conditions, so-called permanent bearing life is possible.
Bearing quality:
Providing worry-free operation for every FAG imported bearing user is our ultimate goal. However, bearing quality alone cannot guarantee worry-free operation. There are other factors that affect the life of each bearing. This includes:
Operating environment:
If the machine is to be in the best condition. Bearings must be properly centered and protected from extreme heat, humidity and contamination.
Install correctly:
With the right installation technology and knowledge and the right tools, the bearings are protected from damage.
Correct maintenance:
Then proper lubrication and maintenance planning and monitoring of bearing conditions are also the focus of the bearing's maximum life.
Worry-free operation:
The concept of worry-free operation is dedicated to the correct service of the bearings and the goal of proper maintenance. The aim is to minimize the risk of downtime caused by the bearings and to ensure that the bearings have all their potential. The existing products and services can help you easily install and maintain the bearings.
For more information and purchase please visit: https://www.supplyforever.com
