Woodworking engraving machine is a kind of machine that is often used in the field of woodworking engraving. In addition to woodworking engraving, it is also used in the field of advertising production. Some manufacturers will choose to use the engraving machine, but as a kind of machine, it has some precautions when it is used. Today, Xiaobian will tell you about the use of this engraving machine in temperature control and water pump.
When designing such a machine, woodworking engraving machine manufacturers will have a pump design, which is designed to control temperature. Why has to be this way? Because the engine and power of the engraving machine are relatively large, it is a medium and large machine. If there is no pump design, the temperature of the machine will become high during long-term use, which will damage the machine and cause the machine to malfunction.
The water pump in the engraving machine should maintain a certain temperature line. If it is lower than this temperature line, stop the operation of the machine in time, then wait for cooling and replace the water in the pump. That is to say, if the temperature of the engraving machine is found to be high when using the engraving machine, heat dissipation is required. Therefore, every time you use the machine, check whether the pump of the machine is normal, and the amount of water stored in it is enough to operate normally. Only in this way can you reduce the chance of machine failure during use.
