Everyone knows that the basic operation of the stone carving machine is not very well understood, but also the advantages of the precision of the stone engraving machine and the fast processing speed. It has gradually become a good helper for processing stone, and it is inevitable in operation. There will be some unnecessary troubles. Next, let's take a look at the operation process of the stone engraving machine and the main functions of the stone engraving machine numerical control system.
First, the stone engraving machine operation process
1. Before you need to use the stone engraving machine, be sure to check the lubrication degree of the engraving machine tool accessories and whether the stone engraving machine protection device can meet the engraving needs.
2. In the process of operating the stone engraving machine, it is necessary to observe whether the accessories of the stone engraving machine are loose or not. If the signs of looseness are found, the operation of the stone engraving machine should be stopped immediately to prevent the process of processing the product. The product has an impact and causes unnecessary losses to the factory.
3. After the speed of the stone engraving machine reaches a certain high speed, attention should be paid to the environment around the engraving machine to prevent unnecessary collisions.
4. The engraving machine should be stopped immediately after encountering abnormal noise of the machine engine to check whether it is the cause of the machine itself.
5. In the process of stone processing, the engraving machine itself cannot stack any tools, workpieces, etc., and it is forbidden to touch the rotating parts when rotating. It is not allowed to tilt the machine on the machine.
6. After the operation is completed, carefully wipe the machine, clean the work site, and disconnect the power supply.
Second, stone carving machine engraving and cutting notes
1. Stone carving. The use of stone for engraving usually refers to the yin carving, and the engraving machine engraves deeper when engraving. When carving stone, the power of the engraving machine is generally set higher. If you encounter a hard stone, the color of the engraved figure may become darker. If you want the color of the engraved stone to be lighter, you can increase the engraving speed appropriately and perform several more operations. Because the material of the stone is different, some stone will wear some fumes when it is engraved by the engraving machine. It can be carefully wiped off with a wet rag. If there is no paint on the engraved stone, it may not be cleaned when wiping. , the surface of the finished product is defaced and affects the sale.
2, stone cutting. When the stone engraving machine cuts the stone, the cutting depth is generally not very deep. If the stone is cut thick, the cutting depth can be appropriately slowed down and the cutting can be performed at different levels, which may cause the stone engraving machine tool to break the knife. When the specific operation is carried out, the common knowledge can be carried out hierarchically, the cutting speed of the engraving machine is slowed down, and the cutting is performed by repeating the lower knife.
Through the above, everyone's understanding of the stone engraving machine will become more profound. Only a good engraving machine can effectively guarantee our production efficiency. If you want to know more about engraving machine, please continue to pay attention to our CNC.
