Woodworking engraving machine computer control system tool setting

      The operation of the computer control system of the coffin engraving machine and the wood engraving machine mainly refers to controlling the rotation speed of the spindle motor of the engraving machine, changing the feed speed, defining the movement step length, and manually controlling the movement and starting of the wood engraving machine on the computer. They are all performed at the interface of EN3D "engraving processing". In order to ensure that the woodworking engraving machine is safe and convenient in use, the operator can set three sets of parameters, and at the same time assist the tool change and the normal operation of the tool. The three sets of position parameters are machine stroke parameters, tool change position and tool position, and the three position parameters of “position parameter setting” are as follows:

1. Tool change position
This group of parameters is used to set the XYZ axis coordinates of the “tool change position” that is convenient for tool change. After setting the “tool change position”, after using “to change tool position” in “special motion”, the machine head will move to the set position and wait for the operator to perform the tool change operation. The specific orientation is: manually control the movement of the machine tool to the position where the tool change operation is convenient, record the current machine tool coordinate value, and input it into the corresponding “position parameter”.

2, coffin engraving machine (woodworking engraving machine) stroke parameters
This group of parameters is used to set the minimum and maximum coordinates of the machine XYZ three axes. After setting the minimum and maximum coordinates of the three axes, the overtravel phenomenon will not occur when the machine tool is manually controlled. However, this set of values ​​is invalid in the programmed machining state. If the workpiece coordinate origin is set incorrectly, “overtravel” may still occur. "The error, the specific setting method is:

According to the stroke range of different types of woodworking engraving machine, the manual movement machine records the machine to move the machine to the limit position of the three axes until it hits the stroke switch. The XYZ three axes can be recorded to move to the minimum and maximum coordinate values. The corresponding position in the parameter can be.